Free Forty and Fabulous SVG

Forty and Fabulous in Amatic SC SVG

Forty and Fabulous in Amatic SC, as a solid black shape
Forty and Fabulous in Amatic SC. The preview is the SVG file itself.

“Forty and Fabulous” set in Amatic SC, narrow hand-drawn capitals, on 2 centred lines. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 75 mm (3.94 × 2.95 in), scales to any size
Pieces16 separate pieces
Outlines to cut24: 16 outer edges and 8 cut-outs
Cut length1,667 mm at this size
Narrowest part1.7 mm at this size
Nodes575 curve and line segments

Measured from the file. PNG: 2,000 × 1,517 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.75 in (25 × 19 mm)0.43 mm423 mm120Too fine for most machines
2 × 1.5 in (51 × 38 mm)0.86 mm847 mm35Fine detail: vinyl and paper only, weed with care
3 × 2.25 in (76 × 57 mm)1.3 mm1,270 mm12Vinyl, card and thin sheet
4 × 3 in (102 × 76 mm)1.7 mm1,694 mm6Vinyl, card and thin sheet
6 × 4.49 in (152 × 114 mm)2.6 mm2,541 mm2Vinyl, card and thin sheet
8 × 5.99 in (203 × 152 mm)3.5 mm3,387 mm1Any material, including 3 mm wood and acrylic
12 × 8.99 in (305 × 228 mm)5.2 mm5,081 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Forty and Fabulous SVG files

← Forty and Fabulous in Alfa Slab One All 12 Forty and Fabulous designs Forty and Fabulous in block capitals →