Free flag SVG

Pirate flag with skull and crossbones SVG

Pirate flag with skull and crossbones. The preview is the SVG file itself.

A dark flag on a pole with a skull over crossed bones cut out of it. Short ties hold the eyes and the nose in place, so it cuts as a single stencil: lay it over white for the classic look.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	74 × 100 mm (2.93 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	6: 1 outer edge and 5 cut-outs
Cut length	722 mm at this size
Narrowest part	1.7 mm at this size
Nodes	126 curve and line segments

Measured from the file. PNG: 1,508 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.74 × 1 in (19 × 25 mm)	0.43 mm	183 mm	120	Too fine for most machines
1.49 × 2 in (38 × 51 mm)	0.86 mm	367 mm	35	Fine detail: vinyl and paper only, weed with care
2.23 × 3 in (57 × 76 mm)	1.3 mm	550 mm	15	Vinyl, card and thin sheet
2.98 × 4 in (76 × 102 mm)	1.7 mm	734 mm	6	Vinyl, card and thin sheet
4.46 × 6 in (113 × 152 mm)	2.6 mm	1,100 mm	2	Vinyl, card and thin sheet
5.95 × 8 in (151 × 203 mm)	3.5 mm	1,467 mm	1	Any material, including 3 mm wood and acrylic
8.93 × 12 in (227 × 305 mm)	5.2 mm	2,201 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More flag SVG files

← Crossed racing flags All 17 flags Jolly Roger flag in black and white →