Free flag SVG

Tattered flag with a ragged edge SVG

Tattered flag with a ragged edge, as a solid black shape
Tattered flag with a ragged edge. The preview is the SVG file itself.

A weather-beaten flag: the free end is torn into ragged points, two long rips run in from it and there are three holes in the cloth. It still cuts as one piece.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size76 × 100 mm (2.97 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut4: 1 outer edge and 3 cut-outs
Cut length526 mm at this size
Narrowest part3.5 mm at this size
Nodes67 curve and line segments

Measured from the file. PNG: 1,529 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.76 × 1 in (19 × 25 mm)0.89 mm134 mm120Fine detail: vinyl and paper only, weed with care
1.51 × 2 in (38 × 51 mm)1.8 mm267 mm35Vinyl, card and thin sheet
2.26 × 3 in (58 × 76 mm)2.7 mm401 mm12Vinyl, card and thin sheet
3.02 × 4 in (77 × 102 mm)3.6 mm534 mm6Any material, including 3 mm wood and acrylic
4.53 × 6 in (115 × 152 mm)5.3 mm802 mm2Any material, including 3 mm wood and acrylic
6.04 × 8 in (153 × 203 mm)7.1 mm1,069 mm1Any material, including 3 mm wood and acrylic
9.06 × 12 in (230 × 305 mm)11 mm1,603 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More flag SVG files

← Flag with a heart cut out All 17 flags Four small flags in different shapes →