Free flag SVG

Waving flag outline on a stand SVG

Waving flag outline on a stand, drawn as a line
Waving flag outline on a stand. The preview is the SVG file itself.

The flag as a line 2.2 mm wide on a solid pole with a two-step base. For colouring pages, foil and engraving, or to cut round a printed design of your own.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size75 × 100 mm (2.97 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut2: 1 outer edge and 1 cut-out
Cut length558 mm at this size
Narrowest part3.7 mm at this size
Nodes52 curve and line segments

Measured from the file. PNG: 1,527 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.75 × 1 in (19 × 25 mm)0.94 mm142 mm120Fine detail: vinyl and paper only, weed with care
1.51 × 2 in (38 × 51 mm)1.9 mm283 mm35Vinyl, card and thin sheet
2.26 × 3 in (57 × 76 mm)2.8 mm425 mm12Vinyl, card and thin sheet
3.02 × 4 in (77 × 102 mm)3.8 mm567 mm6Any material, including 3 mm wood and acrylic
4.52 × 6 in (115 × 152 mm)5.6 mm850 mm2Any material, including 3 mm wood and acrylic
6.03 × 8 in (153 × 203 mm)7.5 mm1,134 mm1Any material, including 3 mm wood and acrylic
9.05 × 12 in (230 × 305 mm)11 mm1,701 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More flag SVG files

← Waving flag on a pole All 17 flags Flag icon with one soft wave →