Free flag SVG

Golf flag in the hole SVG

Golf flag in the hole, as a solid black shape
Golf flag in the hole. The preview is the SVG file itself.

A pin with a pointed flag standing in the hole on an oval green, with a ball resting a short putt away. Ball, green and pin are welded, so the scene is one piece.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size90 × 100 mm (3.54 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut2: 1 outer edge and 1 cut-out
Cut length460 mm at this size
Narrowest part2.3 mm at this size
Nodes52 curve and line segments

Measured from the file. PNG: 1,804 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.9 × 1 in (23 × 25 mm)0.58 mm117 mm110Fine detail: vinyl and paper only, weed with care
1.8 × 2 in (46 × 51 mm)1.2 mm234 mm30Vinyl, card and thin sheet
2.69 × 3 in (68 × 76 mm)1.8 mm351 mm12Vinyl, card and thin sheet
3.59 × 4 in (91 × 102 mm)2.3 mm467 mm6Vinyl, card and thin sheet
5.39 × 6 in (137 × 152 mm)3.5 mm701 mm2Any material, including 3 mm wood and acrylic
7.18 × 8 in (182 × 203 mm)4.7 mm935 mm1Any material, including 3 mm wood and acrylic
10.78 × 12 in (274 × 305 mm)7 mm1,402 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More flag SVG files

← Jolly Roger flag in black and white All 17 flags White flag on a stick →