Free flag SVG

Four small flags in different shapes SVG

Four small flags in different shapes. The preview is the SVG file itself.

Four loose flags, each on its own pole: a rectangle, a swallowtail, a pointed pennant and a tapered burgee with a forked end. Ungroup them and use whichever suits.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	89 × 100 mm (3.51 × 3.94 in), scales to any size
Pieces	4 separate pieces
Outlines to cut	4 outlines
Cut length	690 mm at this size
Narrowest part	2.8 mm at this size
Nodes	91 curve and line segments

Measured from the file. PNG: 1,792 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.89 × 1 in (23 × 25 mm)	0.71 mm	175 mm	110	Fine detail: vinyl and paper only, weed with care
1.78 × 2 in (45 × 51 mm)	1.4 mm	351 mm	30	Vinyl, card and thin sheet
2.68 × 3 in (68 × 76 mm)	2.1 mm	526 mm	12	Vinyl, card and thin sheet
3.57 × 4 in (91 × 102 mm)	2.8 mm	701 mm	6	Vinyl, card and thin sheet
5.35 × 6 in (136 × 152 mm)	4.3 mm	1,052 mm	2	Any material, including 3 mm wood and acrylic
7.14 × 8 in (181 × 203 mm)	5.7 mm	1,402 mm	1	Any material, including 3 mm wood and acrylic
10.7 × 12 in (272 × 305 mm)	8.5 mm	2,103 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More flag SVG files

← Tattered flag with a ragged edge All 17 flags Dive flag on a float, layered →