Free flag SVG

Crossed racing flags SVG

Crossed racing flags, as a solid black shape
Crossed racing flags. The preview is the SVG file itself.

Two checkered flags on poles that cross near the foot, each flying outwards. The left flag is a mirror image of the right, and the pair is welded into one piece where the poles meet.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 65 mm (3.94 × 2.54 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut13: 1 outer edge and 12 cut-outs
Cut length754 mm at this size
Narrowest part1.7 mm at this size
Nodes130 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,319 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.65 in (25 × 16 mm)0.43 mm192 mm140Too fine for most machines
2 × 1.29 in (51 × 33 mm)0.86 mm383 mm40Fine detail: vinyl and paper only, weed with care
3 × 1.94 in (76 × 49 mm)1.3 mm575 mm15Vinyl, card and thin sheet
4 × 2.58 in (102 × 66 mm)1.7 mm766 mm8Vinyl, card and thin sheet
6 × 3.88 in (152 × 98 mm)2.6 mm1,149 mm2Vinyl, card and thin sheet
8 × 5.17 in (203 × 131 mm)3.5 mm1,532 mm2Any material, including 3 mm wood and acrylic
12 × 7.75 in (305 × 197 mm)5.2 mm2,298 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More flag SVG files

← Checkered race flag on a pole All 17 flags Pirate flag with skull and crossbones →