Free flag SVG

Bunting flags on a string SVG

Bunting flags on a string. The preview is the SVG file itself.

Seven small flags on a sagging string, pointed and fork-tailed by turns, with a knot and a loose end at each side. One welded piece for cards, invitations and cake toppers.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 28 mm (3.94 × 1.11 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	1 outline
Cut length	421 mm at this size
Narrowest part	2.1 mm at this size
Nodes	47 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 617 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.28 in (25 × 7 mm)	0.53 mm	107 mm	250	Fine detail: vinyl and paper only, weed with care
2 × 0.56 in (51 × 14 mm)	1.1 mm	214 mm	80	Vinyl, card and thin sheet
3 × 0.84 in (76 × 21 mm)	1.6 mm	321 mm	33	Vinyl, card and thin sheet
4 × 1.12 in (102 × 29 mm)	2.1 mm	428 mm	18	Vinyl, card and thin sheet
6 × 1.69 in (152 × 43 mm)	3.2 mm	642 mm	6	Any material, including 3 mm wood and acrylic
8 × 2.25 in (203 × 57 mm)	4.3 mm	855 mm	4	Any material, including 3 mm wood and acrylic
12 × 3.37 in (305 × 86 mm)	6.4 mm	1,283 mm	3	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More flag SVG files

← White flag on a stick All 17 flags Crossed flags, blank →