Jolly Roger flag in black and white SVG
The pirate flag in two layers: a black cloth with a slow wave in it, and a white skull over crossed bones to stick on top. The eye sockets, nose and tooth lines are open, so the black shows through.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 71 mm (3.94 × 2.81 in), scales to any size |
|---|---|
| Pieces | 2 separate pieces |
| Outlines to cut | 5: 2 outer edges and 3 cut-outs |
| Cut length | 821 mm at this size |
| Narrowest part | Nothing narrower than 6 mm at this size |
| Nodes | 110 curve and line segments |
| Layers | 2: layer 1 flag and layer 2 skull and bones |
Measured from the file. PNG: 2,000 × 1,450 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.71 in (25 × 18 mm) | Over 1.5 mm | 209 mm | 130 | Vinyl, card and thin sheet |
| 2 × 1.43 in (51 × 36 mm) | Over 3 mm | 417 mm | 35 | Any material, including 3 mm wood and acrylic |
| 3 × 2.14 in (76 × 54 mm) | Over 4.6 mm | 626 mm | 15 | Any material, including 3 mm wood and acrylic |
| 4 × 2.86 in (102 × 73 mm) | Over 6.1 mm | 834 mm | 6 | Any material, including 3 mm wood and acrylic |
| 6 × 4.28 in (152 × 109 mm) | Over 9.1 mm | 1,251 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 5.71 in (203 × 145 mm) | Over 12 mm | 1,668 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 8.57 in (305 × 218 mm) | Over 18 mm | 2,502 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More flag SVG files
-
Golf flag in the hole Solid · one piece -
White flag on a stick Outline · one piece -
Bunting flags on a string Solid · one piece -
Crossed flags, blank Solid · one piece -
Flagpole with a small flag Solid · one piece -
Flag with a heart cut out Solid · one piece -
Tattered flag with a ragged edge Solid · one piece -
Four small flags in different shapes Solid · 4 pieces
← Pirate flag with skull and crossbones All 17 flags Golf flag in the hole →