Free fish SVG

Fish outline SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Fish outline, drawn as a line
Fish outline. The preview is the SVG file itself.

The classic fish drawn as an even line with a gill, a side fin and a net of scales, plus a dot for the eye. The dot is a second, loose piece. For colouring pages, foil and pen plotters.

What is in the file

Size100 × 65 mm (3.94 × 2.54 in), scales to any size
Pieces2 separate pieces
Outlines to cut37: 2 outer edges and 35 cut-outs
Cut length1,318 mm at this size
Narrowest part1 mm at this size
Nodes380 curve and line segments

Measured from the file. PNG: 2,000 × 1,319 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.65 in (25 × 16 mm)0.25 mm335 mm140Too fine for most machines
2 × 1.29 in (51 × 33 mm)0.51 mm670 mm40Fine detail: vinyl and paper only, weed with care
3 × 1.94 in (76 × 49 mm)0.76 mm1,004 mm15Fine detail: vinyl and paper only, weed with care
4 × 2.58 in (102 × 66 mm)1 mm1,339 mm8Vinyl, card and thin sheet
6 × 3.88 in (152 × 98 mm)1.5 mm2,009 mm2Vinyl, card and thin sheet
8 × 5.17 in (203 × 131 mm)2 mm2,678 mm2Vinyl, card and thin sheet
12 × 7.75 in (305 × 197 mm)3 mm4,017 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More fish SVG files

← Fish silhouette All 21 fish Simple round fish for children →