Free fish SVG

Goldfish with a flowing tail SVG

Goldfish with a flowing tail, as a solid black shape — Goldfish with a flowing tail. The preview is the SVG file itself.

A round-bodied fancy goldfish with a large eye, scales and a long double tail with rays cut into it. For a pet shelf label, a pond sign or a child’s room.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 75 mm (3.94 × 2.93 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	13: 1 outer edge and 12 cut-outs
Cut length	870 mm at this size
Narrowest part	4.6 mm at this size
Nodes	252 curve and line segments

Measured from the file. PNG: 2,000 × 1,510 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.75 in (25 × 19 mm)	1.2 mm	221 mm	120	Vinyl, card and thin sheet
2 × 1.49 in (51 × 38 mm)	2.3 mm	442 mm	35	Vinyl, card and thin sheet
3 × 2.24 in (76 × 57 mm)	3.5 mm	663 mm	15	Any material, including 3 mm wood and acrylic
4 × 2.98 in (102 × 76 mm)	4.7 mm	884 mm	6	Any material, including 3 mm wood and acrylic
6 × 4.47 in (152 × 114 mm)	7 mm	1,326 mm	2	Any material, including 3 mm wood and acrylic
8 × 5.96 in (203 × 151 mm)	9.3 mm	1,768 mm	1	Any material, including 3 mm wood and acrylic
12 × 8.94 in (305 × 227 mm)	14 mm	2,652 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More fish SVG files

← Trout fish with spots All 21 fish Angelfish with stripes →