Free fish SVG

Trout fish with spots SVG

Trout fish with spots, as a solid black shape — Trout fish with spots. The preview is the SVG file itself.

A slender trout with a small head, a square-cut tail, the little fatty fin near its tail and a scatter of round spots along its back above the side line.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 45 mm (3.94 × 1.76 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	14: 1 outer edge and 13 cut-outs
Cut length	560 mm at this size
Narrowest part	2.3 mm at this size
Nodes	209 curve and line segments

Measured from the file. PNG: 2,000 × 938 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.45 in (25 × 11 mm)	0.58 mm	142 mm	180	Fine detail: vinyl and paper only, weed with care
2 × 0.9 in (51 × 23 mm)	1.2 mm	284 mm	55	Vinyl, card and thin sheet
3 × 1.34 in (76 × 34 mm)	1.8 mm	427 mm	21	Vinyl, card and thin sheet
4 × 1.79 in (102 × 46 mm)	2.3 mm	569 mm	12	Vinyl, card and thin sheet
6 × 2.69 in (152 × 68 mm)	3.5 mm	853 mm	4	Any material, including 3 mm wood and acrylic
8 × 3.58 in (203 × 91 mm)	4.7 mm	1,138 mm	3	Any material, including 3 mm wood and acrylic
12 × 5.38 in (305 × 137 mm)	7 mm	1,707 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More fish SVG files

← Leaping largemouth bass fish All 21 fish Goldfish with a flowing tail →