Free fish SVG

Angelfish with stripes SVG

Angelfish with stripes, as a solid black shape — Angelfish with stripes. The preview is the SVG file itself.

A freshwater angelfish: a flat disc of a body, tall swept fins above and below, two trailing feelers and three curved bars cut through body and fins.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	71 × 100 mm (2.78 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	5: 1 outer edge and 4 cut-outs
Cut length	715 mm at this size
Narrowest part	2.8 mm at this size
Nodes	155 curve and line segments

Measured from the file. PNG: 1,433 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.71 × 1 in (18 × 25 mm)	0.71 mm	182 mm	130	Fine detail: vinyl and paper only, weed with care
1.41 × 2 in (36 × 51 mm)	1.4 mm	363 mm	35	Vinyl, card and thin sheet
2.11 × 3 in (54 × 76 mm)	2.1 mm	545 mm	15	Vinyl, card and thin sheet
2.82 × 4 in (72 × 102 mm)	2.8 mm	726 mm	8	Vinyl, card and thin sheet
4.23 × 6 in (107 × 152 mm)	4.3 mm	1,090 mm	2	Any material, including 3 mm wood and acrylic
5.64 × 8 in (143 × 203 mm)	5.7 mm	1,453 mm	2	Any material, including 3 mm wood and acrylic
8.46 × 12 in (215 × 305 mm)	8.5 mm	2,179 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More fish SVG files

← Goldfish with a flowing tail All 21 fish Leaping marlin fish →