Free fish SVG

Leaping largemouth bass fish SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Leaping largemouth bass fish, as a solid black shape
Leaping largemouth bass fish. The preview is the SVG file itself.

A bass curled in mid jump with its mouth thrown wide open and its tail kicked up, the pose on every tackle shop sign. Cut-out eye, gill, side fin and stripe.

What is in the file

Size100 × 92 mm (3.94 × 3.61 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut14: 1 outer edge and 13 cut-outs
Cut length686 mm at this size
Narrowest part1.4 mm at this size
Nodes250 curve and line segments

Measured from the file. PNG: 2,000 × 1,838 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.92 in (25 × 23 mm)0.36 mm174 mm100Too fine for most machines
2 × 1.83 in (51 × 47 mm)0.71 mm348 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.75 in (76 × 70 mm)1.1 mm523 mm12Vinyl, card and thin sheet
4 × 3.66 in (102 × 93 mm)1.4 mm697 mm6Vinyl, card and thin sheet
6 × 5.5 in (152 × 140 mm)2.1 mm1,045 mm2Vinyl, card and thin sheet
8 × 7.33 in (203 × 186 mm)2.8 mm1,394 mm1Vinyl, card and thin sheet
12 × 10.99 in (305 × 279 mm)4.3 mm2,091 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More fish SVG files

← Bass fish silhouette All 21 fish Trout fish with spots →