Free firework SVG

Three firework rockets SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Three firework rockets, as a solid black shape
Three firework rockets. The preview is the SVG file itself.

Three rockets fanned out from one point, with stars, slanted stripes and zigzags cut in their tubes. Their sticks cross at the bottom, which joins them into one piece.

What is in the file

Size85 × 100 mm (3.35 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut14: 1 outer edge and 13 cut-outs
Cut length995 mm at this size
Narrowest part1.4 mm at this size
Nodes125 curve and line segments
Also found as4th of july rockets SVG

Measured from the file. PNG: 1,712 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.85 × 1 in (22 × 25 mm)0.36 mm253 mm110Too fine for most machines
1.7 × 2 in (43 × 51 mm)0.71 mm505 mm30Fine detail: vinyl and paper only, weed with care
2.55 × 3 in (65 × 76 mm)1.1 mm758 mm12Vinyl, card and thin sheet
3.4 × 4 in (86 × 102 mm)1.4 mm1,011 mm6Vinyl, card and thin sheet
5.1 × 6 in (130 × 152 mm)2.1 mm1,516 mm2Vinyl, card and thin sheet
6.8 × 8 in (173 × 203 mm)2.8 mm2,022 mm1Vinyl, card and thin sheet
10.2 × 12 in (259 × 305 mm)4.3 mm3,033 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More firework SVG files

← Firework rocket All 17 fireworks Firecracker bundle →