Free firework SVG

Firework rocket SVG

Firework rocket, as a solid black shape
Firework rocket. The preview is the SVG file itself.

A stick rocket ready to go: a tube with a star and two stripes cut in it, a pointed cone, a long stick and a lit fuse with a spark on the end.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size52 × 100 mm (2.04 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut5: 1 outer edge and 4 cut-outs
Cut length499 mm at this size
Narrowest part1.8 mm at this size
Nodes84 curve and line segments

Measured from the file. PNG: 1,073 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.52 × 1 in (13 × 25 mm)0.46 mm127 mm160Too fine for most machines
1.04 × 2 in (26 × 51 mm)0.91 mm253 mm45Fine detail: vinyl and paper only, weed with care
1.55 × 3 in (39 × 76 mm)1.4 mm380 mm18Vinyl, card and thin sheet
2.07 × 4 in (53 × 102 mm)1.8 mm507 mm10Vinyl, card and thin sheet
3.11 × 6 in (79 × 152 mm)2.7 mm760 mm3Vinyl, card and thin sheet
4.14 × 8 in (105 × 203 mm)3.7 mm1,014 mm2Any material, including 3 mm wood and acrylic
6.22 × 12 in (158 × 305 mm)5.5 mm1,521 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More firework SVG files

← Fountain firework All 17 fireworks Three firework rockets →