Free firework SVG

Single firecracker with a lit fuse SVG

Single firecracker with a lit fuse, as a solid black shape
Single firecracker with a lit fuse. The preview is the SVG file itself.

One fat firecracker tipped to one side, with a star and two slanted stripes cut in the tube and a spark crackling at the end of its fuse. A bold, simple shape for children’s projects.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size44 × 100 mm (1.72 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut6: 1 outer edge and 5 cut-outs
Cut length592 mm at this size
Narrowest part3.1 mm at this size
Nodes73 curve and line segments

Measured from the file. PNG: 919 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.44 × 1 in (11 × 25 mm)0.79 mm150 mm190Fine detail: vinyl and paper only, weed with care
0.88 × 2 in (22 × 51 mm)1.6 mm301 mm55Vinyl, card and thin sheet
1.31 × 3 in (33 × 76 mm)2.4 mm451 mm24Vinyl, card and thin sheet
1.75 × 4 in (45 × 102 mm)3.1 mm601 mm12Any material, including 3 mm wood and acrylic
2.63 × 6 in (67 × 152 mm)4.7 mm902 mm4Any material, including 3 mm wood and acrylic
3.5 × 8 in (89 × 203 mm)6.3 mm1,203 mm3Any material, including 3 mm wood and acrylic
5.26 × 12 in (134 × 305 mm)9.4 mm1,804 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More firework SVG files

← Firecracker bundle All 17 fireworks Sparkler →