Free firework SVG

Firework burst in three colours SVG

Firework burst in three colours, in layered colours
Firework burst in three colours. The preview is the SVG file itself.

A burst split by colour: long red trails, short blue ones, and a gold star with two rings of gold dots. Cut each layer from its own vinyl and place them with one sheet of transfer tape each.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 100 mm (3.94 × 3.94 in), scales to any size
Pieces49 separate pieces
Outlines to cut49 outlines
Cut length1,626 mm at this size
Narrowest part5.3 mm at this size
Nodes250 curve and line segments
Layers3: red, blue and gold

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 1 in (25 × 25 mm)1.3 mm413 mm100Vinyl, card and thin sheet
2 × 2 in (51 × 51 mm)2.7 mm826 mm25Vinyl, card and thin sheet
3 × 3 in (76 × 76 mm)4 mm1,239 mm9Any material, including 3 mm wood and acrylic
4 × 4 in (102 × 102 mm)5.4 mm1,652 mm4Any material, including 3 mm wood and acrylic
6 × 6 in (152 × 152 mm)8.1 mm2,478 mm1Any material, including 3 mm wood and acrylic
8 × 8 in (203 × 203 mm)11 mm3,304 mm1Any material, including 3 mm wood and acrylic
12 × 12 in (305 × 305 mm)16 mm4,956 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More firework SVG files

← Simple firework of loose dashes All 17 fireworks Firework cut out of a circle →