Free firework SVG

Firework line drawing SVG

Firework line drawing, drawn as a line — Firework line drawing. The preview is the SVG file itself.

A burst drawn with thin even lines: twelve long ones that end in small rings and twelve short ones that end in dots, round a ring in the middle. For foil, engraving and pen plotting.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 100 mm (3.94 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	14: 1 outer edge and 13 cut-outs
Cut length	1,917 mm at this size
Narrowest part	2 mm at this size
Nodes	196 curve and line segments
Symmetry	12-fold rotation

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 1 in (25 × 25 mm)	0.51 mm	487 mm	100	Fine detail: vinyl and paper only, weed with care
2 × 2 in (51 × 51 mm)	1 mm	974 mm	25	Vinyl, card and thin sheet
3 × 3 in (76 × 76 mm)	1.5 mm	1,461 mm	9	Vinyl, card and thin sheet
4 × 4 in (102 × 102 mm)	2 mm	1,948 mm	4	Vinyl, card and thin sheet
6 × 6 in (152 × 152 mm)	3 mm	2,922 mm	1	Any material, including 3 mm wood and acrylic
8 × 8 in (203 × 203 mm)	4.1 mm	3,895 mm	1	Any material, including 3 mm wood and acrylic
12 × 12 in (305 × 305 mm)	6.1 mm	5,843 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More firework SVG files

← Spinning pinwheel firework All 17 fireworks Fountain firework →