Free firework SVG

Firework burst in one piece SVG

Firework burst in one piece, as a solid black shape
Firework burst in one piece. The preview is the SVG file itself.

Twelve long trails and twelve short ones flying out from a single point, each thin at the centre and ending in a round head. All joined in the middle, so it lifts off the mat as one piece.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 100 mm (3.94 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut1 outline
Cut length1,425 mm at this size
Narrowest part2.3 mm at this size
Nodes409 curve and line segments
Symmetry12-fold rotation

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 1 in (25 × 25 mm)0.58 mm362 mm100Fine detail: vinyl and paper only, weed with care
2 × 2 in (51 × 51 mm)1.2 mm724 mm25Vinyl, card and thin sheet
3 × 3 in (76 × 76 mm)1.8 mm1,086 mm9Vinyl, card and thin sheet
4 × 4 in (102 × 102 mm)2.3 mm1,448 mm4Vinyl, card and thin sheet
6 × 6 in (152 × 152 mm)3.5 mm2,172 mm1Any material, including 3 mm wood and acrylic
8 × 8 in (203 × 203 mm)4.7 mm2,896 mm1Any material, including 3 mm wood and acrylic
12 × 12 in (305 × 305 mm)7 mm4,343 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More firework SVG files

← Sparkler All 17 fireworks Simple firework of loose dashes →