Free firework SVG

Firecracker bundle SVG

Firecracker bundle, as a solid black shape
Firecracker bundle. The preview is the SVG file itself.

Three firecrackers tied together with a band, each with its own fuse and a spark at the tip. The tubes stand a little apart and the band is marked across each one with two thin lines.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size89 × 100 mm (3.52 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut15: 1 outer edge and 14 cut-outs
Cut length1,427 mm at this size
Narrowest part2.8 mm at this size
Nodes215 curve and line segments

Measured from the file. PNG: 1,794 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.89 × 1 in (23 × 25 mm)0.71 mm362 mm110Fine detail: vinyl and paper only, weed with care
1.79 × 2 in (45 × 51 mm)1.4 mm725 mm30Vinyl, card and thin sheet
2.68 × 3 in (68 × 76 mm)2.1 mm1,087 mm12Vinyl, card and thin sheet
3.57 × 4 in (91 × 102 mm)2.8 mm1,450 mm6Vinyl, card and thin sheet
5.36 × 6 in (136 × 152 mm)4.3 mm2,175 mm2Any material, including 3 mm wood and acrylic
7.14 × 8 in (181 × 203 mm)5.7 mm2,900 mm1Any material, including 3 mm wood and acrylic
10.72 × 12 in (272 × 305 mm)8.5 mm4,349 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More firework SVG files

← Three firework rockets All 17 fireworks Single firecracker with a lit fuse →