Free fern SVG

Fern frond outline SVG

Fern frond outline, drawn as a line — Fern frond outline. The preview is the SVG file itself.

A straight frond as a line drawing: a solid stalk with nine pairs of leaflets, each one outlined. For colouring pages, embroidery patterns, foil and pen plotters.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	54 × 100 mm (2.12 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	34: 1 outer edge and 33 cut-outs
Cut length	1,163 mm at this size
Narrowest part	1.7 mm at this size
Nodes	385 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 1,112 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.54 × 1 in (14 × 25 mm)	0.43 mm	295 mm	160	Too fine for most machines
1.08 × 2 in (27 × 51 mm)	0.86 mm	591 mm	45	Fine detail: vinyl and paper only, weed with care
1.61 × 3 in (41 × 76 mm)	1.3 mm	886 mm	18	Vinyl, card and thin sheet
2.15 × 4 in (55 × 102 mm)	1.7 mm	1,182 mm	10	Vinyl, card and thin sheet
3.23 × 6 in (82 × 152 mm)	2.6 mm	1,772 mm	3	Vinyl, card and thin sheet
4.3 × 8 in (109 × 203 mm)	3.5 mm	2,363 mm	2	Any material, including 3 mm wood and acrylic
6.46 × 12 in (164 × 305 mm)	5.2 mm	3,545 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More fern SVG files

← Two crossed fern fronds All 14 ferns Fern silhouette →