Free fern SVG

Bracken frond, three times cut SVG

Bracken frond, three times cut, as a solid black shape — Bracken frond, three times cut. The preview is the SVG file itself.

The broad triangular frond of bracken: a straight stalk carrying seven pairs of side branches, each a small frond of its own, and a leafy tip. Exactly symmetrical, for autumn and woodland projects.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	90 × 100 mm (3.54 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	71: 1 outer edge and 70 cut-outs
Cut length	1,556 mm at this size
Narrowest part	1.9 mm at this size
Nodes	665 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 1,804 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.9 × 1 in (23 × 25 mm)	0.48 mm	395 mm	110	Too fine for most machines
1.8 × 2 in (46 × 51 mm)	0.97 mm	790 mm	30	Fine detail: vinyl and paper only, weed with care
2.69 × 3 in (68 × 76 mm)	1.4 mm	1,186 mm	12	Vinyl, card and thin sheet
3.59 × 4 in (91 × 102 mm)	1.9 mm	1,581 mm	6	Vinyl, card and thin sheet
5.39 × 6 in (137 × 152 mm)	2.9 mm	2,371 mm	2	Vinyl, card and thin sheet
7.18 × 8 in (182 × 203 mm)	3.9 mm	3,162 mm	1	Any material, including 3 mm wood and acrylic
10.78 × 12 in (274 × 305 mm)	5.8 mm	4,743 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More fern SVG files

← Ferns growing in a clump All 14 ferns Maidenhair fern sprig →