Free fern SVG

Fern border SVG

Fern border, as a solid black shape — Fern border. The preview is the SVG file itself.

Two fronds laid tip outwards from a knot in the middle, with slim leaflets above and below the stalk. Exactly symmetrical, for a menu, a table runner or the head of a letter.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 30 mm (3.94 × 1.16 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	1 outline
Cut length	770 mm at this size
Narrowest part	1.7 mm at this size
Nodes	256 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 644 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.3 in (25 × 7 mm)	0.43 mm	196 mm	240	Too fine for most machines
2 × 0.59 in (51 × 15 mm)	0.86 mm	391 mm	75	Fine detail: vinyl and paper only, weed with care
3 × 0.88 in (76 × 22 mm)	1.3 mm	587 mm	33	Vinyl, card and thin sheet
4 × 1.18 in (102 × 30 mm)	1.7 mm	782 mm	16	Vinyl, card and thin sheet
6 × 1.77 in (152 × 45 mm)	2.6 mm	1,173 mm	6	Vinyl, card and thin sheet
8 × 2.36 in (203 × 60 mm)	3.5 mm	1,565 mm	4	Any material, including 3 mm wood and acrylic
12 × 3.54 in (305 × 90 mm)	5.2 mm	2,347 mm	3	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More fern SVG files

← Fern corner spray All 14 ferns Two crossed fern fronds →