Free fern SVG

Simple fern frond SVG

Simple fern frond, as a solid black shape — Simple fern frond. The preview is the SVG file itself.

A straight frond with six pairs of plain rounded leaflets and one at the tip, exactly symmetrical. Nothing fine in it, so it cuts at sticker size and in felt or thin wood.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	56 × 100 mm (2.2 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	1 outline
Cut length	596 mm at this size
Narrowest part	2.2 mm at this size
Nodes	96 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 1,150 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.56 × 1 in (14 × 25 mm)	0.56 mm	151 mm	160	Fine detail: vinyl and paper only, weed with care
1.12 × 2 in (28 × 51 mm)	1.1 mm	303 mm	45	Vinyl, card and thin sheet
1.67 × 3 in (43 × 76 mm)	1.7 mm	454 mm	18	Vinyl, card and thin sheet
2.23 × 4 in (57 × 102 mm)	2.2 mm	606 mm	10	Vinyl, card and thin sheet
3.35 × 6 in (85 × 152 mm)	3.4 mm	908 mm	3	Any material, including 3 mm wood and acrylic
4.46 × 8 in (113 × 203 mm)	4.5 mm	1,211 mm	2	Any material, including 3 mm wood and acrylic
6.7 × 12 in (170 × 305 mm)	6.7 mm	1,817 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More fern SVG files

← Arching fern frond All 14 ferns Fiddlehead, a fern unfurling →