Free fern SVG

Fiddlehead, a fern unfurling SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Fiddlehead, a fern unfurling, as a solid black shape
Fiddlehead, a fern unfurling. The preview is the SVG file itself.

A young frond still coiled at the tip like the head of a violin, with small leaflets budding round the outside of the spiral and two more shoots beside it. For spring cards, garden journals and jewellery.

What is in the file

Size76 × 100 mm (3 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut2: 1 outer edge and 1 cut-out
Cut length917 mm at this size
Narrowest part1.1 mm at this size
Nodes304 curve and line segments
Also found asSpiral fern SVG

Measured from the file. PNG: 1,542 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.76 × 1 in (19 × 25 mm)0.28 mm233 mm120Too fine for most machines
1.52 × 2 in (39 × 51 mm)0.56 mm466 mm35Fine detail: vinyl and paper only, weed with care
2.29 × 3 in (58 × 76 mm)0.84 mm699 mm12Fine detail: vinyl and paper only, weed with care
3.05 × 4 in (77 × 102 mm)1.1 mm932 mm6Vinyl, card and thin sheet
4.57 × 6 in (116 × 152 mm)1.7 mm1,398 mm2Vinyl, card and thin sheet
6.1 × 8 in (155 × 203 mm)2.2 mm1,863 mm1Vinyl, card and thin sheet
9.14 × 12 in (232 × 305 mm)3.4 mm2,795 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More fern SVG files

← Simple fern frond All 14 ferns Ferns growing in a clump →