Free fern SVG

Arching fern frond SVG

Arching fern frond, as a solid black shape — Arching fern frond. The preview is the SVG file itself.

One frond that bends over as it grows: eleven pairs of leaflets, each cut into round lobes down both edges, longest low down and shrinking to the tip. The twice-cut look of a real woodland fern.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	84 × 100 mm (3.31 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	1 outline
Cut length	1,037 mm at this size
Narrowest part	2.2 mm at this size
Nodes	824 curve and line segments

Measured from the file. PNG: 1,694 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.84 × 1 in (21 × 25 mm)	0.56 mm	263 mm	110	Fine detail: vinyl and paper only, weed with care
1.68 × 2 in (43 × 51 mm)	1.1 mm	527 mm	30	Vinyl, card and thin sheet
2.52 × 3 in (64 × 76 mm)	1.7 mm	790 mm	12	Vinyl, card and thin sheet
3.36 × 4 in (85 × 102 mm)	2.2 mm	1,054 mm	6	Vinyl, card and thin sheet
5.05 × 6 in (128 × 152 mm)	3.4 mm	1,580 mm	2	Any material, including 3 mm wood and acrylic
6.73 × 8 in (171 × 203 mm)	4.5 mm	2,107 mm	1	Any material, including 3 mm wood and acrylic
10.09 × 12 in (256 × 305 mm)	6.7 mm	3,161 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More fern SVG files

← Layered fern in three greens All 14 ferns Simple fern frond →