Free fern SVG

Layered fern in three greens SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Layered fern in three greens, in layered colours
Layered fern in three greens. The preview is the SVG file itself.

Three layers to stack: the whole frond in deep green, then the leaflets of one side in a mid green and those of the other in a pale spring green. The base shows as a dark edge and a dark stalk.

What is in the file

Size84 × 100 mm (3.32 × 3.94 in), scales to any size
Pieces23 separate pieces
Outlines to cut34: 23 outer edges and 11 cut-outs
Cut length1,764 mm at this size
Narrowest part1.2 mm at this size
Nodes1,038 curve and line segments
Layers3: base, left leaflets and right leaflets

Measured from the file. PNG: 1,700 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.84 × 1 in (21 × 25 mm)0.3 mm448 mm110Too fine for most machines
1.69 × 2 in (43 × 51 mm)0.61 mm896 mm30Fine detail: vinyl and paper only, weed with care
2.53 × 3 in (64 × 76 mm)0.91 mm1,344 mm12Fine detail: vinyl and paper only, weed with care
3.38 × 4 in (86 × 102 mm)1.2 mm1,792 mm6Vinyl, card and thin sheet
5.06 × 6 in (129 × 152 mm)1.8 mm2,688 mm2Vinyl, card and thin sheet
6.75 × 8 in (172 × 203 mm)2.4 mm3,584 mm1Vinyl, card and thin sheet
10.13 × 12 in (257 × 305 mm)3.7 mm5,377 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More fern SVG files

← Fern silhouette All 14 ferns Arching fern frond →