Free Faith SVG

Faith with a swash underline SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Faith with a swash underline, as a solid black shape
Faith with a swash underline. The preview is the SVG file itself.

“Faith” in Pacifico script with a tapering swash swept underneath it, welded to the word where a letter dips down to meet it, or sitting just below it where none does.

What is in the file

Size100 × 48 mm (3.94 × 1.9 in), scales to any size
Pieces3 separate pieces
Outlines to cut6: 3 outer edges and 3 cut-outs
Cut length875 mm at this size
Narrowest part2.5 mm at this size
Nodes234 curve and line segments

Measured from the file. PNG: 2,000 × 1,006 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.48 in (25 × 12 mm)0.64 mm222 mm170Fine detail: vinyl and paper only, weed with care
2 × 0.97 in (51 × 25 mm)1.3 mm445 mm50Vinyl, card and thin sheet
3 × 1.45 in (76 × 37 mm)1.9 mm667 mm21Vinyl, card and thin sheet
4 × 1.93 in (102 × 49 mm)2.5 mm889 mm10Vinyl, card and thin sheet
6 × 2.9 in (152 × 74 mm)3.8 mm1,333 mm3Any material, including 3 mm wood and acrylic
8 × 3.86 in (203 × 98 mm)5.1 mm1,778 mm3Any material, including 3 mm wood and acrylic
12 × 5.8 in (305 × 147 mm)7.6 mm2,667 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Faith SVG files

← Faith in block capitals All 13 Faith designs Faith with hearts →