Free Faith SVG

Faith with hearts SVG

Faith with hearts, as a solid black shape — Faith with hearts. The preview is the SVG file itself.

“Faith” in Lobster with a row of three hearts above the words and three below, the middle one larger. The hearts are loose pieces, spaced to the width of the lettering.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 67 mm (3.94 × 2.64 in), scales to any size
Pieces	9 separate pieces
Outlines to cut	10: 9 outer edges and 1 cut-out
Cut length	821 mm at this size
Narrowest part	2.1 mm at this size
Nodes	237 curve and line segments

Measured from the file. PNG: 2,000 × 1,367 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.67 in (25 × 17 mm)	0.53 mm	209 mm	140	Fine detail: vinyl and paper only, weed with care
2 × 1.34 in (51 × 34 mm)	1.1 mm	417 mm	35	Vinyl, card and thin sheet
3 × 2.01 in (76 × 51 mm)	1.6 mm	626 mm	15	Vinyl, card and thin sheet
4 × 2.68 in (102 × 68 mm)	2.1 mm	834 mm	8	Vinyl, card and thin sheet
6 × 4.03 in (152 × 102 mm)	3.2 mm	1,251 mm	2	Any material, including 3 mm wood and acrylic
8 × 5.37 in (203 × 136 mm)	4.3 mm	1,668 mm	2	Any material, including 3 mm wood and acrylic
12 × 8.05 in (305 × 205 mm)	6.4 mm	2,502 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Faith SVG files

← Faith with a swash underline All 12 Faith designs Faith outline lettering →