Free Faith SVG

Faith in Lobster SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Faith in Lobster, as a solid black shape
Faith in Lobster. The preview is the SVG file itself.

“Faith” set in Lobster, a bold upright script. Upright and heavy, it stays readable from across a room and weeds easily.

What is in the file

Size100 × 37 mm (3.94 × 1.45 in), scales to any size
Pieces3 separate pieces
Outlines to cut4: 3 outer edges and 1 cut-out
Cut length641 mm at this size
Narrowest part2 mm at this size
Nodes121 curve and line segments

Measured from the file. PNG: 2,000 × 785 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.37 in (25 × 9 mm)0.51 mm163 mm210Fine detail: vinyl and paper only, weed with care
2 × 0.74 in (51 × 19 mm)1 mm326 mm65Vinyl, card and thin sheet
3 × 1.1 in (76 × 28 mm)1.5 mm488 mm27Vinyl, card and thin sheet
4 × 1.47 in (102 × 37 mm)2 mm651 mm14Vinyl, card and thin sheet
6 × 2.21 in (152 × 56 mm)3 mm977 mm5Any material, including 3 mm wood and acrylic
8 × 2.94 in (203 × 75 mm)4.1 mm1,303 mm3Any material, including 3 mm wood and acrylic
12 × 4.42 in (305 × 112 mm)6.1 mm1,954 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Faith SVG files

← Faith in Pacifico All 13 Faith designs Faith in Kaushan Script →