Free Faith SVG

Faith in block capitals SVG

Faith in block capitals, as a solid black shape — Faith in block capitals. The preview is the SVG file itself.

“FAITH” in the tall, narrow capitals of Bebas Neue. Each letter is a separate piece with thick, even strokes.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 44 mm (3.94 × 1.72 in), scales to any size
Pieces	5 separate pieces
Outlines to cut	6: 5 outer edges and 1 cut-out
Cut length	761 mm at this size
Narrowest part	5.7 mm at this size
Nodes	47 curve and line segments

Measured from the file. PNG: 2,000 × 915 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.44 in (25 × 11 mm)	1.4 mm	193 mm	190	Vinyl, card and thin sheet
2 × 0.87 in (51 × 22 mm)	2.9 mm	387 mm	55	Vinyl, card and thin sheet
3 × 1.31 in (76 × 33 mm)	4.3 mm	580 mm	24	Any material, including 3 mm wood and acrylic
4 × 1.74 in (102 × 44 mm)	5.8 mm	773 mm	12	Any material, including 3 mm wood and acrylic
6 × 2.62 in (152 × 66 mm)	8.7 mm	1,160 mm	4	Any material, including 3 mm wood and acrylic
8 × 3.49 in (203 × 89 mm)	12 mm	1,546 mm	3	Any material, including 3 mm wood and acrylic
12 × 5.23 in (305 × 133 mm)	17 mm	2,320 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Faith SVG files

← Faith in Amatic SC All 12 Faith designs Faith with a swash underline →