Free Faith SVG

Faith with a cross SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Faith with a cross, as a solid black shape — Faith with a cross. The preview is the SVG file itself.

“Faith” with a cross above the words, which are set in Lobster. The picture is a separate piece, so it can be cut in a second colour or left off.

What is in the file

Size	100 × 85 mm (3.94 × 3.34 in), scales to any size
Pieces	4 separate pieces
Outlines to cut	5: 4 outer edges and 1 cut-out
Cut length	807 mm at this size
Narrowest part	2 mm at this size
Nodes	129 curve and line segments

Measured from the file. PNG: 2,000 × 1,708 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.85 in (25 × 22 mm)	0.51 mm	205 mm	110	Fine detail: vinyl and paper only, weed with care
2 × 1.7 in (51 × 43 mm)	1 mm	410 mm	30	Vinyl, card and thin sheet
3 × 2.54 in (76 × 65 mm)	1.5 mm	615 mm	12	Vinyl, card and thin sheet
4 × 3.39 in (102 × 86 mm)	2 mm	820 mm	6	Vinyl, card and thin sheet
6 × 5.09 in (152 × 129 mm)	3 mm	1,230 mm	2	Any material, including 3 mm wood and acrylic
8 × 6.78 in (203 × 172 mm)	4.1 mm	1,640 mm	1	Any material, including 3 mm wood and acrylic
12 × 10.18 in (305 × 258 mm)	6.1 mm	2,460 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Faith SVG files

← Faith with a drop shadow All 13 Faith designs Faith in Pacifico →