Free Faith SVG

Faith with a drop shadow SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Faith with a drop shadow, in layered colours
Faith with a drop shadow. The preview is the SVG file itself.

“Faith” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.

What is in the file

Size100 × 41 mm (3.94 × 1.61 in), scales to any size
Pieces4 separate pieces
Outlines to cut12: 4 outer edges and 8 cut-outs
Cut length1,262 mm at this size
Narrowest part2.6 mm at this size
Nodes303 curve and line segments
Layers2: shadow and words

Measured from the file. PNG: 2,000 × 865 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.41 in (25 × 10 mm)0.66 mm321 mm200Fine detail: vinyl and paper only, weed with care
2 × 0.82 in (51 × 21 mm)1.3 mm641 mm55Vinyl, card and thin sheet
3 × 1.23 in (76 × 31 mm)2 mm962 mm24Vinyl, card and thin sheet
4 × 1.64 in (102 × 42 mm)2.6 mm1,282 mm12Vinyl, card and thin sheet
6 × 2.46 in (152 × 62 mm)4 mm1,923 mm4Any material, including 3 mm wood and acrylic
8 × 3.28 in (203 × 83 mm)5.3 mm2,564 mm3Any material, including 3 mm wood and acrylic
12 × 4.92 in (305 × 125 mm)7.9 mm3,847 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Faith SVG files

← Faith stencil plate All 13 Faith designs Faith with a cross →