Faith in Alfa Slab One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Faith” set in Alfa Slab One, a very heavy slab serif. Thick strokes and blunt square serifs give it the weight of a poster headline.
What is in the file
| Size | 100 × 30 mm (3.94 × 1.16 in), scales to any size |
|---|---|
| Pieces | 6 separate pieces |
| Outlines to cut | 7: 6 outer edges and 1 cut-out |
| Cut length | 576 mm at this size |
| Narrowest part | 3.6 mm at this size |
| Nodes | 98 curve and line segments |
Measured from the file. PNG: 2,000 × 644 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.3 in (25 × 7 mm) | 0.91 mm | 146 mm | 240 | Fine detail: vinyl and paper only, weed with care |
| 2 × 0.59 in (51 × 15 mm) | 1.8 mm | 293 mm | 75 | Vinyl, card and thin sheet |
| 3 × 0.88 in (76 × 22 mm) | 2.7 mm | 439 mm | 33 | Vinyl, card and thin sheet |
| 4 × 1.18 in (102 × 30 mm) | 3.7 mm | 585 mm | 16 | Any material, including 3 mm wood and acrylic |
| 6 × 1.77 in (152 × 45 mm) | 5.5 mm | 878 mm | 6 | Any material, including 3 mm wood and acrylic |
| 8 × 2.36 in (203 × 60 mm) | 7.3 mm | 1,170 mm | 4 | Any material, including 3 mm wood and acrylic |
| 12 × 3.54 in (305 × 90 mm) | 11 mm | 1,756 mm | 3 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Faith SVG files
-
Faith in Amatic SC Solid · 5 pieces
-
Faith in block capitals Solid · 5 pieces
-
Faith with a swash underline Solid · 3 pieces
-
Faith with hearts Solid · 9 pieces
-
Faith outline lettering Outline · 7 pieces
-
Faith stencil plate Solid · one piece
-
Faith with a drop shadow Layered · 4 pieces
-
Faith with a cross Solid · 4 pieces
← Faith in Lilita One All 13 Faith designs Faith in Amatic SC →