Free Faith SVG

Faith stencil plate SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Faith stencil plate, as a solid black shape
Faith stencil plate. The preview is the SVG file itself.

A rounded plate with “FAITH” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

What is in the file

Size100 × 46 mm (3.94 × 1.81 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut6: 1 outer edge and 5 cut-outs
Cut length811 mm at this size
Narrowest part1.7 mm at this size
Nodes107 curve and line segments

Measured from the file. PNG: 2,000 × 960 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.46 in (25 × 12 mm)0.43 mm206 mm180Too fine for most machines
2 × 0.92 in (51 × 23 mm)0.86 mm412 mm50Fine detail: vinyl and paper only, weed with care
3 × 1.38 in (76 × 35 mm)1.3 mm618 mm21Vinyl, card and thin sheet
4 × 1.84 in (102 × 47 mm)1.7 mm824 mm10Vinyl, card and thin sheet
6 × 2.75 in (152 × 70 mm)2.6 mm1,236 mm4Vinyl, card and thin sheet
8 × 3.67 in (203 × 93 mm)3.5 mm1,648 mm3Any material, including 3 mm wood and acrylic
12 × 5.51 in (305 × 140 mm)5.2 mm2,472 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Faith SVG files

← Faith outline lettering All 13 Faith designs Faith with a drop shadow →