Free eagle SVG

Soaring eagle silhouette SVG

Soaring eagle silhouette, as a solid black shape
Soaring eagle silhouette. The preview is the SVG file itself.

An eagle seen from below with its wings held out, six finger feathers at each wing tip, a fanned tail and its head turned to show the beak. No inside cuts, so it weeds in seconds.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 69 mm (3.94 × 2.72 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut1 outline
Cut length419 mm at this size
Narrowest partNothing narrower than 6 mm at this size
Nodes201 curve and line segments

Measured from the file. PNG: 2,000 × 1,406 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.69 in (25 × 18 mm)Over 1.5 mm106 mm130Vinyl, card and thin sheet
2 × 1.38 in (51 × 35 mm)Over 3 mm213 mm35Any material, including 3 mm wood and acrylic
3 × 2.07 in (76 × 53 mm)Over 4.6 mm319 mm15Any material, including 3 mm wood and acrylic
4 × 2.76 in (102 × 70 mm)Over 6.1 mm426 mm8Any material, including 3 mm wood and acrylic
6 × 4.15 in (152 × 105 mm)Over 9.1 mm639 mm2Any material, including 3 mm wood and acrylic
8 × 5.53 in (203 × 140 mm)Over 12 mm851 mm2Any material, including 3 mm wood and acrylic
12 × 8.29 in (305 × 211 mm)Over 18 mm1,277 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More eagle SVG files

← Eagle head silhouette All 15 eagles Gliding eagle with wings in a V →