Free eagle SVG

Bald eagle on a branch SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Bald eagle on a branch, as a solid black shape
Bald eagle on a branch. The preview is the SVG file itself.

The perched eagle with its white head set off by a ragged collar line and its folded wing shown by a long cut down the side. Put white behind it and the collar and wing edge light up.

What is in the file

Size87 × 100 mm (3.43 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut7: 1 outer edge and 6 cut-outs
Cut length671 mm at this size
Narrowest part1 mm at this size
Nodes210 curve and line segments

Measured from the file. PNG: 1,750 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.87 × 1 in (22 × 25 mm)0.25 mm170 mm110Too fine for most machines
1.74 × 2 in (44 × 51 mm)0.51 mm341 mm30Fine detail: vinyl and paper only, weed with care
2.61 × 3 in (66 × 76 mm)0.76 mm511 mm12Fine detail: vinyl and paper only, weed with care
3.48 × 4 in (88 × 102 mm)1 mm682 mm6Vinyl, card and thin sheet
5.22 × 6 in (133 × 152 mm)1.5 mm1,023 mm2Vinyl, card and thin sheet
6.96 × 8 in (177 × 203 mm)2 mm1,363 mm1Vinyl, card and thin sheet
10.44 × 12 in (265 × 305 mm)3 mm2,045 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More eagle SVG files

← Eagle perched on a branch All 15 eagles Eagle face from the front →