Free eagle SVG

Bald eagle head with feathers SVG

Bald eagle head with feathers, as a solid black shape
Bald eagle head with feathers. The preview is the SVG file itself.

A bald eagle head in profile with a hooked beak, a hard brow over the eye, a nostril and rows of feather tips down a ragged neck. The centrepiece for signs, shirts and laser engraving.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size91 × 100 mm (3.59 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut23: 1 outer edge and 22 cut-outs
Cut length1,128 mm at this size
Narrowest part1.9 mm at this size
Nodes375 curve and line segments

Measured from the file. PNG: 1,829 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.91 × 1 in (23 × 25 mm)0.48 mm287 mm100Too fine for most machines
1.82 × 2 in (46 × 51 mm)0.97 mm573 mm30Fine detail: vinyl and paper only, weed with care
2.73 × 3 in (69 × 76 mm)1.4 mm860 mm12Vinyl, card and thin sheet
3.64 × 4 in (93 × 102 mm)1.9 mm1,146 mm6Vinyl, card and thin sheet
5.47 × 6 in (139 × 152 mm)2.9 mm1,719 mm2Vinyl, card and thin sheet
7.29 × 8 in (185 × 203 mm)3.9 mm2,292 mm1Any material, including 3 mm wood and acrylic
10.93 × 12 in (278 × 305 mm)5.8 mm3,438 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More eagle SVG files

← Layered bald eagle badge in five colours All 15 eagles Eagle head silhouette →