Free eagle SVG

Gliding eagle with wings in a V SVG

Gliding eagle with wings in a V, as a solid black shape — Gliding eagle with wings in a V. The preview is the SVG file itself.

An eagle gliding with its wings lifted into a shallow V and its feathers drawn in: a line across each wing where the small feathers end, two chest bands, three tail slits and an eye.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 87 mm (3.94 × 3.43 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	9: 1 outer edge and 8 cut-outs
Cut length	760 mm at this size
Narrowest part	2.2 mm at this size
Nodes	303 curve and line segments

Measured from the file. PNG: 2,000 × 1,754 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.87 in (25 × 22 mm)	0.56 mm	193 mm	110	Fine detail: vinyl and paper only, weed with care
2 × 1.74 in (51 × 44 mm)	1.1 mm	386 mm	30	Vinyl, card and thin sheet
3 × 2.62 in (76 × 66 mm)	1.7 mm	579 mm	12	Vinyl, card and thin sheet
4 × 3.49 in (102 × 89 mm)	2.2 mm	772 mm	6	Vinyl, card and thin sheet
6 × 5.23 in (152 × 133 mm)	3.4 mm	1,158 mm	2	Any material, including 3 mm wood and acrylic
8 × 6.98 in (203 × 177 mm)	4.5 mm	1,544 mm	1	Any material, including 3 mm wood and acrylic
12 × 10.46 in (305 × 266 mm)	6.7 mm	2,316 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More eagle SVG files

← Soaring eagle silhouette All 15 eagles Spread eagle with raised wings →