Free eagle SVG

Eagle perched on a branch SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Eagle perched on a branch, as a solid black shape
Eagle perched on a branch. The preview is the SVG file itself.

An eagle sitting upright on a broken branch, seen from the side, as a solid shape with just the eye cut out. Its tail hangs below the branch and its talons grip it.

What is in the file

Size87 × 100 mm (3.43 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut3: 1 outer edge and 2 cut-outs
Cut length445 mm at this size
Narrowest part2 mm at this size
Nodes129 curve and line segments
Also found asFull body eagle SVG

Measured from the file. PNG: 1,750 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.87 × 1 in (22 × 25 mm)0.51 mm113 mm110Fine detail: vinyl and paper only, weed with care
1.74 × 2 in (44 × 51 mm)1 mm226 mm30Vinyl, card and thin sheet
2.61 × 3 in (66 × 76 mm)1.5 mm339 mm12Vinyl, card and thin sheet
3.48 × 4 in (88 × 102 mm)2 mm452 mm6Vinyl, card and thin sheet
5.22 × 6 in (133 × 152 mm)3 mm678 mm2Any material, including 3 mm wood and acrylic
6.96 × 8 in (177 × 203 mm)4.1 mm904 mm1Any material, including 3 mm wood and acrylic
10.44 × 12 in (265 × 305 mm)6.1 mm1,356 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More eagle SVG files

← Eagle landing with talons out All 15 eagles Bald eagle on a branch →