Free eagle SVG

Eagle landing with talons out SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Eagle landing with talons out, as a solid black shape
Eagle landing with talons out. The preview is the SVG file itself.

An eagle about to land: body upright, wings thrown up and back, tail spread as a brake and both legs reaching forward with the talons open. The most dramatic pose in the set.

What is in the file

Size73 × 100 mm (2.88 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut4: 1 outer edge and 3 cut-outs
Cut length640 mm at this size
Narrowest part1.8 mm at this size
Nodes252 curve and line segments
Also found asBald eagle landing silhouette SVG

Measured from the file. PNG: 1,485 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.73 × 1 in (19 × 25 mm)0.46 mm163 mm130Too fine for most machines
1.46 × 2 in (37 × 51 mm)0.91 mm325 mm35Fine detail: vinyl and paper only, weed with care
2.2 × 3 in (56 × 76 mm)1.4 mm488 mm15Vinyl, card and thin sheet
2.93 × 4 in (74 × 102 mm)1.8 mm650 mm6Vinyl, card and thin sheet
4.39 × 6 in (112 × 152 mm)2.7 mm975 mm2Vinyl, card and thin sheet
5.86 × 8 in (149 × 203 mm)3.7 mm1,300 mm2Any material, including 3 mm wood and acrylic
8.78 × 12 in (223 × 305 mm)5.5 mm1,951 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More eagle SVG files

← Flying eagle from the side All 15 eagles Eagle perched on a branch →