Free eagle SVG

Eagle face from the front SVG

Eagle face from the front, as a solid black shape — Eagle face from the front. The preview is the SVG file itself.

An eagle staring straight at you: slanted brows, small hard eyes with the pupils left in, a hooked beak down the middle and a ruff of pointed feathers. Symmetrical, for badges and coasters.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	74 × 100 mm (2.9 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	12: 1 outer edge and 11 cut-outs
Cut length	967 mm at this size
Narrowest part	2.1 mm at this size
Nodes	246 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 1,494 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.74 × 1 in (19 × 25 mm)	0.53 mm	246 mm	130	Fine detail: vinyl and paper only, weed with care
1.47 × 2 in (37 × 51 mm)	1.1 mm	491 mm	35	Vinyl, card and thin sheet
2.21 × 3 in (56 × 76 mm)	1.6 mm	737 mm	15	Vinyl, card and thin sheet
2.95 × 4 in (75 × 102 mm)	2.1 mm	982 mm	6	Vinyl, card and thin sheet
4.42 × 6 in (112 × 152 mm)	3.2 mm	1,474 mm	2	Any material, including 3 mm wood and acrylic
5.9 × 8 in (150 × 203 mm)	4.3 mm	1,965 mm	2	Any material, including 3 mm wood and acrylic
8.84 × 12 in (225 × 305 mm)	6.4 mm	2,947 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More eagle SVG files

← Bald eagle on a branch All 15 eagles Eagle wings →