Chinese dragon SVG
A long, wingless dragon in the Chinese manner: a body in three bends with scales and a back fin, antlers, two curling whiskers, a mane, four clawed feet and a tufted tail. For Lunar New Year.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 78 mm (3.94 × 3.05 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 26: 1 outer edge and 25 cut-outs |
| Cut length | 902 mm at this size |
| Narrowest part | 1.4 mm at this size |
| Nodes | 718 curve and line segments |
Measured from the file. PNG: 2,000 × 1,567 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.78 in (25 × 20 mm) | 0.36 mm | 229 mm | 120 | Too fine for most machines |
| 2 × 1.55 in (51 × 39 mm) | 0.71 mm | 458 mm | 30 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.32 in (76 × 59 mm) | 1.1 mm | 687 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.1 in (102 × 79 mm) | 1.4 mm | 916 mm | 6 | Vinyl, card and thin sheet |
| 6 × 4.65 in (152 × 118 mm) | 2.1 mm | 1,375 mm | 2 | Vinyl, card and thin sheet |
| 8 × 6.2 in (203 × 157 mm) | 2.8 mm | 1,833 mm | 1 | Vinyl, card and thin sheet |
| 12 × 9.3 in (305 × 236 mm) | 4.3 mm | 2,749 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Baby dragon 
Sleeping dragon 
Pair of dragon wings 
Dragon egg 
Dragon eye 
Dragon outline 
Mandala dragon 
Classic dragon with wings 