Dragon outline SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
The standing dragon as one even line round its head, horns, wing, spikes, legs and tail, in a single closed piece. For colouring pages, foil, engraving and pen plotters.
What is in the file
| Size | 100 × 82 mm (3.94 × 3.21 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 12: 1 outer edge and 11 cut-outs |
| Cut length | 1,367 mm at this size |
| Narrowest part | 1.2 mm at this size |
| Nodes | 768 curve and line segments |
Measured from the file. PNG: 2,000 × 1,644 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.82 in (25 × 21 mm) | 0.3 mm | 347 mm | 120 | Too fine for most machines |
| 2 × 1.63 in (51 × 41 mm) | 0.61 mm | 694 mm | 30 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.44 in (76 × 62 mm) | 0.91 mm | 1,042 mm | 12 | Fine detail: vinyl and paper only, weed with care |
| 4 × 3.26 in (102 × 83 mm) | 1.2 mm | 1,389 mm | 6 | Vinyl, card and thin sheet |
| 6 × 4.89 in (152 × 124 mm) | 1.8 mm | 2,083 mm | 2 | Vinyl, card and thin sheet |
| 8 × 6.52 in (203 × 166 mm) | 2.4 mm | 2,778 mm | 1 | Vinyl, card and thin sheet |
| 12 × 9.78 in (305 × 248 mm) | 3.7 mm | 4,167 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.