Dragon head SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A dragon’s head and neck in profile: jaws open on five teeth, a narrow eye, two long horns, a spiked frill at the jaw and spikes down the neck, which ends in a curved cut.
What is in the file
| Size | 100 × 78 mm (3.94 × 3.07 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 8: 1 outer edge and 7 cut-outs |
| Cut length | 775 mm at this size |
| Narrowest part | 1.4 mm at this size |
| Nodes | 298 curve and line segments |
Measured from the file. PNG: 2,000 × 1,579 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.78 in (25 × 20 mm) | 0.36 mm | 197 mm | 120 | Too fine for most machines |
| 2 × 1.56 in (51 × 40 mm) | 0.71 mm | 394 mm | 30 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.34 in (76 × 60 mm) | 1.1 mm | 591 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.12 in (102 × 79 mm) | 1.4 mm | 787 mm | 6 | Vinyl, card and thin sheet |
| 6 × 4.69 in (152 × 119 mm) | 2.1 mm | 1,181 mm | 2 | Vinyl, card and thin sheet |
| 8 × 6.25 in (203 × 159 mm) | 2.8 mm | 1,575 mm | 1 | Vinyl, card and thin sheet |
| 12 × 9.37 in (305 × 238 mm) | 4.3 mm | 2,362 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.