Sleeping dragon SVG
A dragon curled into a ring, asleep with its chin on its tail, one wing folded on its back and its spikes round the outside. A round design for coasters and book covers.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 80 mm (3.94 × 3.16 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 23: 1 outer edge and 22 cut-outs |
| Cut length | 1,075 mm at this size |
| Narrowest part | 1.5 mm at this size |
| Nodes | 526 curve and line segments |
Measured from the file. PNG: 2,000 × 1,619 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.8 in (25 × 20 mm) | 0.38 mm | 273 mm | 120 | Too fine for most machines |
| 2 × 1.6 in (51 × 41 mm) | 0.76 mm | 546 mm | 30 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.41 in (76 × 61 mm) | 1.1 mm | 819 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.21 in (102 × 81 mm) | 1.5 mm | 1,092 mm | 6 | Vinyl, card and thin sheet |
| 6 × 4.81 in (152 × 122 mm) | 2.3 mm | 1,638 mm | 2 | Vinyl, card and thin sheet |
| 8 × 6.42 in (203 × 163 mm) | 3 mm | 2,184 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 9.62 in (305 × 244 mm) | 4.6 mm | 3,277 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Pair of dragon wings 
Dragon egg 
Dragon eye 
Dragon outline 
Mandala dragon 
Classic dragon with wings 
Fire-breathing dragon 
Dragon silhouette 