Classic dragon with wings SVG
A western dragon standing in profile: an open jaw with teeth, two swept-back horns, a raised wing with its finger bones cut out, a row of spikes down its back, four clawed feet and an arrow-tipped tail.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 82 mm (3.94 × 3.21 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 16: 1 outer edge and 15 cut-outs |
| Cut length | 1,038 mm at this size |
| Narrowest part | 1.5 mm at this size |
| Nodes | 476 curve and line segments |
Measured from the file. PNG: 2,000 × 1,644 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.82 in (25 × 21 mm) | 0.38 mm | 264 mm | 120 | Too fine for most machines |
| 2 × 1.63 in (51 × 41 mm) | 0.76 mm | 527 mm | 30 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.44 in (76 × 62 mm) | 1.1 mm | 791 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.26 in (102 × 83 mm) | 1.5 mm | 1,055 mm | 6 | Vinyl, card and thin sheet |
| 6 × 4.89 in (152 × 124 mm) | 2.3 mm | 1,582 mm | 2 | Vinyl, card and thin sheet |
| 8 × 6.52 in (203 × 166 mm) | 3 mm | 2,109 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 9.78 in (305 × 248 mm) | 4.6 mm | 3,164 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Fire-breathing dragon 
Dragon silhouette 
Dragon head 
Chinese dragon 
Baby dragon 
Sleeping dragon 
Pair of dragon wings 
Dragon egg 