Pair of dragon wings SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
Two spread wings, each with a clawed wrist, three finger bones cut out and a scalloped edge. They are two loose pieces: set them behind a name, a photo or a costume back.
What is in the file
| Size | 100 × 33 mm (3.94 × 1.28 in), scales to any size |
|---|---|
| Pieces | 2 separate pieces |
| Outlines to cut | 8: 2 outer edges and 6 cut-outs |
| Cut length | 527 mm at this size |
| Narrowest part | 1.5 mm at this size |
| Nodes | 145 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 2,000 × 702 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.33 in (25 × 8 mm) | 0.38 mm | 134 mm | 230 | Too fine for most machines |
| 2 × 0.65 in (51 × 17 mm) | 0.76 mm | 268 mm | 70 | Fine detail: vinyl and paper only, weed with care |
| 3 × 0.98 in (76 × 25 mm) | 1.1 mm | 402 mm | 30 | Vinyl, card and thin sheet |
| 4 × 1.3 in (102 × 33 mm) | 1.5 mm | 535 mm | 16 | Vinyl, card and thin sheet |
| 6 × 1.95 in (152 × 50 mm) | 2.3 mm | 803 mm | 5 | Vinyl, card and thin sheet |
| 8 × 2.6 in (203 × 66 mm) | 3 mm | 1,071 mm | 4 | Any material, including 3 mm wood and acrylic |
| 12 × 3.9 in (305 × 99 mm) | 4.6 mm | 1,606 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.