Free dragon SVG

Dragon eye SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Dragon eye, as a solid black shape
Dragon eye. The preview is the SVG file itself.

A reptile’s eye: an almond opening, a round iris with a slit pupil, a heavy brow and scales cut all round it. For book covers, door signs and the lid of a dice box.

What is in the file

Size100 × 74 mm (3.94 × 2.89 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut18: 1 outer edge and 17 cut-outs
Cut length894 mm at this size
Narrowest part1.8 mm at this size
Nodes221 curve and line segments

Measured from the file. PNG: 2,000 × 1,490 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.74 in (25 × 19 mm)0.46 mm227 mm130Too fine for most machines
2 × 1.47 in (51 × 37 mm)0.91 mm454 mm35Fine detail: vinyl and paper only, weed with care
3 × 2.2 in (76 × 56 mm)1.4 mm681 mm15Vinyl, card and thin sheet
4 × 2.94 in (102 × 75 mm)1.8 mm908 mm6Vinyl, card and thin sheet
6 × 4.41 in (152 × 112 mm)2.7 mm1,362 mm2Vinyl, card and thin sheet
8 × 5.88 in (203 × 149 mm)3.7 mm1,817 mm2Any material, including 3 mm wood and acrylic
12 × 8.82 in (305 × 224 mm)5.5 mm2,725 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More dragon SVG files

← Dragon egg All 12 dragons Dragon outline →